Tuesday, December 9, 2008

Tapestry Mosaic Coffee Table

The inspiration - a tapestry that my mom picked up on
the streets of Thamel in Kathmandu, Nepal.



I started with the tapestry that hangs on the wall behind our sofa. I knew that I wanted the mosaic to mirror the quilt, but I wasn't sure of the exact design. So, first I started by cutting many, many little pieces of glass in the colors that I wanted to use. Then, I was able to rearrange them, like a puzzle, until the design was just right.

The Process:


Using No Days Glaze mosaic adhesive and a heat gun, I was able to work one section of the mosaic at a time. The No Days Glaze is incredibly convenient. It comes in packages of several rubbery-plastic-like sheets. You lay a sheet down on the surface you are mosaic-ing, place the glass pieces down (and move them around), and fire up the heat gun (on low) until the pieces are hot and the adhesive melts into place. This step is tricky. You want the adhesive to melt, but if you don't heat the glass up enough, the glass will pop off when grouting. Also, if you heat the glass too long, it will start swimming around on the glaze. Then, you end up chasing each piece back into place (with a pair of tweezers, or a pencil tip, and NOT your fingers - the glass is HOT!).
After several days and plenty of movies (a Harry Potter-a-thon and a terrible Indiana Jones and the Crystal Skull), I had all of the pieces adhered to the surface of the table, and was waiting for a free day to allow me to start and finish the grouting process.
A dirty job, but I was excited to get it over with....

and to let it dry so I could polish it to the beautiful and intricate table that it is:

Oh! And I finished it just in time to enter the "It Pays" to use No Days Glaze Mosaic Contest!!
They have started another challenge for 2009, as well! So, if you'd like to try your hand at the mosaic adhesive, enter your project for a chance to win $250!!