Fused and Slumped Sampler Platters

The Sampler Platter fused glass class is officially over and it was incredibly successful! I'm so happy with the plates that my students put together!


This is a detail shot of one of the plates. You can see the blue tile in the middle that was made during the frit, powder and stringer session has been capped with clear glass and accented with a tea light flame worked star-shaped stringer. As always, the dichro bits just don't photograph as strikingly as they appear in person.

This plate makes me think outer space, galaxy, the next frontier...Cool, huh? Great job, Alycia!


My plate was not as successful...Don't get me wrong, it showcased every possible technique I could think of for a beginners' class, to a fault! Unfortunately, some incompatible glass found it's way into my scrap bin. What?!? How the heck did that get there?!?

So, how do you tell it's incompatible? Well, if you've been following me for long, then you know I've run into this problem before...and thankfully, it's only MY plate that's ever affected! So, as soon as this plate made it's way out of the kiln, I knew something was amiss...

If you look closely at this photo, you can see the hairline fractures at the edge of the two blue squares. See that? That's incompatibility. The crack follows those blue pieces too well to be anything else! And guess what else? When I scored my plate to free the pieces, the knocks with the hammer (gentle taps on the underside of the score) broke those pieces out almost perfectly! So, after removing the blue glass, I refilled the voids with some aventurine green scrap pieces to melt back down into one. It's currently in the kiln, and with any luck will be a slumped platter within 24 hours!

Here is the other platter from the class that is awaiting a slump firing. It is also currently in the kiln. My new-ish Paragon Pearl-22 and I are still getting to know each other. The first firing just didn't fire hot enough or long enough and I wasn't happy with the fact that you could feel the seam between pieces on the underside of the plate. With Pooja's permission, I also drilled a little hole in the middle to see if I could squeeze the biggest bubble out. We'll soon see how well that turned out!